ANADIGICS’ Power Amplifiers Selected for MSM7200 HSUPA and MSM6280 HSDPA
Reference Designs from QUALCOMM
WARREN, N.J., Dec. 13 /Xinhua-PRNewswire/ -- ANADIGICS, Inc. (Nasdaq:
ANAD), a leading supplier of wireless and broadband solutions, today
announced that the Company’s WCDMA and GPRS/EDGE power amplifiers (PAs) have
been specified by QUALCOMM for the Mobile Station Modem(TM) (MSM(TM)) MSM7200
(TM) and MSM6280(TM) chipset reference designs. The MSM7200 solution supports
the high-speed uplink packet access (HSUPA) standard for peak data rates of
7.2 Mbps on the downlink and 5.76 Mbps on the uplink. The MSM6280 solution
supports the HSDPA standard for enhanced peak downlink rates of up to 7.2
Mbps. HSDPA and HSUPA allow users to achieve wireless broadband speeds that
rival wired connections.
QUALCOMM’s MSM7200 reference design specifies ANADIGICS’ WCDMA and EDGE
PAs to support eight frequency bands. The four WCDMA frequency bands are
enabled by ANADIGICS’ AWT6273, AWT6278, AWT6279, and AWT6282 PAs, while the
four EDGE frequency bands are supported by ANADIGICS’ AWT6280 polar EDGE PA.
QUALCOMM’s MSM6280 reference design specifies ANADIGICS’ AWT6273,
AWT6278 and AWT6279 WCDMA PAs, as well as ANADIGICS’ AND0041 quad-band polar
EDGE PA.
The AWT6273, AWT6278 and AWT6279 WCDMA PAs utilize ANADIGICS’ 3G High-
Efficiency-at-Low-Power (HELP3(TM)) technology to deliver the industry’s
highest levels of efficiency. This level of performance enables manufacturers
to extend battery life in mobile handsets, smart phones, data cards and 3G-
enabled notebook computers.
"QUALCOMM’s MSM7200 and MSM6280 chipsets raise the bar in mobile
performance, delivering advanced multimedia and communication capabilities,"
said Dr. Sanjay K. Jha, President of QUALCOMM CDMA Technologies. "The
evolution of today’s 3G networks is enabling mobile users to work and play
with functionality that was previously reserved for wired broadband
connections, and these two chipsets together with ANADIGICS’ advanced power
amplifiers represent powerful solutions for the next generations of wireless
devices."
"As mobile manufacturers develop advanced 3G devices to take advantage of
the data speeds enabled by HSDPA and HSUPA networks, battery life becomes a
critical concern. ANADIGICS’ industry-leading HELP3(TM) WCDMA power
amplifiers have been optimized not only to deliver excellent voice clarity
and data integrity, but also to significantly improve the operating time of
3G devices," said Dr. Bami Bastani, President and CEO of ANADIGICS. "QUALCOMM
remains the industry leader in mobile chipsets, and we look forward to
continuing to work together."
ANADIGICS’ HELP3(TM) WCDMA PAs offer full compliance with HSDPA and
HSUPA requirements, while reducing average current consumption by 75 percent
compared with a conventional power amplifier. HELP3(TM) PAs provide
exceptionally low quiescent currents of 7 mA without a DC-DC converter, and
eliminate the requirements for external voltage regulation. The world-class
performance and integration of ANADIGICS’ HELP3(TM) products is achieved
using the Company’s patented InGaP-Plus(TM) technology, which combines
bipolar and field-effect transistor (FET) devices on the same InGaP GaAs die.
For additional information, contact ANADIGICS by phone (908) 668-5000 or
FAX (908) 668-5132 or visit the Company’s Web site at
http://www.anadigics.com .
About ANADIGICS, Inc.
ANADIGICS, Inc. (Nasdaq: ANAD) designs and manufactures radio frequency
integrated circuit (RFIC) solutions for growing broadband and wireless
communications markets. The Company’s innovative high frequency RFICs enable
manufacturers of communications equipment to enhance overall system
performance, and reduce manufacturing cost and time to market. By utilizing
state-of-the-art manufacturing processes for its RFICs, ANADIGICS achieves
the high-volume and cost-effective products required by leading companies in
its targeted high-growth communications markets. ANADIGICS was the first GaAs
IC manufacturer to receive ISO 9001 certification and is certified to the ISO
9001:2000 and ISO 14001:2004 international standards.
Safe Harbor Statement
Except for historical information contained herein, this press release
contains projections and other forward-looking statements (as that term is
defined in the Securities Exchange Act of 1934, as amended). These
projections and forward-looking statements reflect the Company’s current
views with respect to future events and financial performance and can
generally be identified as such because the context of the statement will
include words such as "believe", "anticipate", "expect", or words of similar
import. Similarly, statements that describe our future plans, objectives,
estimates or goals are forward-looking statements. No assurances can be
given, however, that these events will occur or that these projections will
be achieved and actual results and developments could differ materially from
those projected as a result of certain factors. Important factors that could
cause actual results and developments to be materially different from those
expressed or implied by such projections and forward-looking statements
include those factors detailed from time to time in our reports filed with
the Securities and Exchange Commission, including the Company’s annual
report on Form 10-K for the year ended December 31, 2005, and those discussed
elsewhere herein.
QUALCOMM is a registered trademark of QUALCOMM Incorporated. Mobile
Station Modem, MSM, MSM7200 and MSM6280 are trademarks of QUALCOMM
Incorporated. All other trademarks are the property of their respective
owners.